For cleaning your car from Iron spots to get that clean and smooth surface again!
Iron spots or “orange spots” are metal particles that forms iron oxide (rust) and appears like orange, yellow or brown dots on your car or rims. Any metal particles from the atmosphere that land on your car’s surface can embed themselves in to the paint and appears as orange spots and makes your car difficult to clean. You can feel that the surface is harsh and rough and that your car does not have the desired smooth and smooth surface.
Also very effective and heavily soiled rims! Fallout remover solves the metal particles, which is important to do as it can otherwise damage the paint and lead to rust. Ultimate Fallout remover also works for rims with brake dust which can sometimes be next to impossible to get clean!
Apply on a clean and dry surface, wait for about 5 minutes and rinse thoroughly with high pressure.
Repeat if necessary on heavily soiled and neglected surfaces. Avoid contact with unpainted surfaces.
To complete the treatment we also recommend to use the Ultimate Clay Bar after you have washed your car with Ultimate Fallout remover.
After treatment, washing with Ultimate Green Degreaser and Ultimate Wash & wax and Ultimate Brilliance is recommended.
The complete treatment:
1.Apply Ultimate Fall out remover on a dry surface (avoid bare metal), wait for five minutes, rinse thoroughly with high pressure washer.
2. Apply Ultimate Green Degreaser and wait a couple of minutes and rinse thoroughly with high pressure washer.
3. Bring out your Ultimate Clay and heat it by hand or in warm water until it is soft and pliable enough to follow the car’s surfaces. Use it together with a strong shampoo mixture . If you run with shampoo, mix about 0.5 dl shampoo / 1 liter of water in a spray bottle like Ultimate Double Action Trigger Sprayer 360 or the regular Ultimate Sprayer. Keep the surface slick and use the Ultimate clay bar with smooth and easy hand and let it sweep of all unwanted particles of your precious paint. After you have completed the treatment with the Ultimate cLay bar it’s time to rinse of the car again.
5. Take your favorite Ultimate Shampoo and wash your car as regular.
6. Pick up your favorite Ultimate product for applying the wanted surface boost.